TEST KIT SALT MASTER

A complete kit for testing saltwater & reef aquariums.Test include:high range pH, ammonia,nitrite,nitrate,4 test tubes, tray & rack.Tests water 4 ways to protect marine fish from dangerous water conditions. Instructions • Use Instructions: Ammonia Test:I. Fill a clean test tube with 5 ml of water to be tested (to the Line on the tube).2. Add 8 drops from Ammonia Test Solution #1, holding the dropper bottle upside down in a completely vertical position to assure uniformity of drops3. Add 8 drops from Ammonia Test Solution #2, holding the dropper bottle upside down in a completely vertical position to assure uniformity of drops.4. Cap the test tube & shake vigorously for 5 seconds.5. Wait 5 minutes for the color to develop.6. Read the test results by comparing the color of the solution to the Ammonia Color Chart. The tube should be viewed in a waft area against the white area of the chart. The doses match indicates the ppm )mg/L) of ammonia in the water sample. Rinse the test tube with clean water offer use. Note: Do not pour test tube contents bock into the aquarium.Nitrite Test:1. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).2. Add 5 drops of Nitrite Test Solution. holding dropper bottle upside down in a completely vertical position to assure uniformity of drops.3. Cap the test tube and shake for 5 seconds.4. Wait 5 minutes for the color to develop.5. Read the test results by comparing the cobra of the solution to the Nitrite Color Chart. The tube should be viewed in a well-lit area against the white area of the chart. The closest match indicates the ppm (mg/L) of nitrite in the water sample. Rinse the test tube with clean water after use. Nitrate Test:1. Fill a clean test tube with 5 ml of water to be tested Ito the line on the tube).2. Add 10 drops from Nitrate Test Solution el, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops.3. Cap the test tube & invert the tube several times to mix solution.4. Vigorously shake the Nitrate Test Solution #2 for at least 30 seconds. This step is extremely important to insure accuracy of test results.5. Now odd 10 drops from Nitrate Test Solution *2 holding dropper bottle upside down in a completely vertical position.High Range pH test:1. Fill a clean lest tube with 5 ml of water to be tested (to the line on the tube).2. Add 5 drops of High Range pH Test Solution. holding dropper bottle upside down in a completely vertical position to assure uniformity of drops.3. Cap the lest tube & invert tube several times to mix solution.4. Read the test results by compering the color of the solution to the High Range pH Color Chart. The tube should be viewed in a well-lit area against the white area of the chart. The closest match indicates the pH of the water sample. Rinse the test tube with clean water after use. • Storage Instructions: Store in a cool, dry, well-ventilated area