BAZOOKA FLUX DIFFUSER LARGE FOR TANK ABOVE 65 G

Our New Generation of the classic Bazooka Flux In-Tank CO2 Diffuser is finally here! Welcome the V2 version of the World's finest Precision NEW Bazooka In-Tank Flux CO2 Diffuser for planted aquariums. The improved ceramic membrane provides the highest dissolution rates thanks to innovative CO2 nano mist technology. A CO2 Flux aquarium diffuser optimises the amount of CO2 entering the aquarium for efficient plant absorption and less co2 waste. As the CO2 bubbles pass through the porous ceramic membrane, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of carbon dioxide in the underwater ecosystem. Depending on the volume of your aquarium, you can choose from two sizes of the Bazooka In-tank Flux CO2 Diffuser: • Small for tanks below 65G (250L) • Large for tanks above 65G (250L) Thanks to its brown coloration, the device blends into the aquascape. The Bazooka Flux CO2 Diffuser is designed to be used as you would a regular in-tank diffuser but provides a higher dissolution rate. This excellent diffuser is equipped with two high-quality suction cups allowing solid positioning of the device on the aquarium glass. Durable materials and natural look make the device a perfect choice for beginners and experienced aquascapers alike. To install the Bazooka Flux Diffuser, simply connect the CO2 regulator with the atomizer via a CO2 resistant tube and tighten the safety nut only by hand. It’s recommended to set the regulator’s pressure to a minimum of 30psi (2bar) as a starting point. Please allow a few minutes for sufficient pressure to build up to allow the CO2 to start passing through the membrane. This diffuser requires at least 40PSI (3bar) working pressure for optimal operation.